EM.5 · RC and RL transients, impedance and resonance

A capacitor voltage and an inductor current cannot change instantly under finite ordinary circuit drives, but their steady-state behaviour is different.

Prerequisites: 14.

• Solve RC charging and discharging with stated initial conditions
• Solve RL current response and account for stored energy
• Use complex impedance, phase and resonance in sinusoidal circuits

For a resistor R in series with a capacitor C and a DC source V_s, Kirchhoff’s voltage law is R dq/dt+q/C=V_s. Define V_C=q/C and τ=RC. After a switch to a constant source, V_C(t)=V_s+(V_C(0)−V_s)exp(−t/τ). An initially uncharged capacitor therefore has V_C=V_s(1−exp(−t/τ)) and charging current I=(V_s/R)exp(−t/τ). With the source removed and the resistor connected across it, V_C=V_C(0)exp(−t/τ). Capacitor voltage is continuous across the switch if there is no impulsive current; the resistor current may change instantly.

In a series RL circuit, Kirchhoff’s law gives L dI/dt+RI=V_s and τ=L/R. The current after a constant drive is I(t)=V_s/R+(I(0)−V_s/R)exp(−t/τ). Inductor current is continuous for a finite voltage; its voltage may change abruptly as switching changes dI/dt. At late times an ideal inductor in a DC circuit acts as a zero-voltage connection, while an ideal capacitor has zero DC current. Stored energies are LI²/2 and CV_C²/2. During decay into a resistor, the initially stored energy becomes resistor heat rather than disappearing when the source is disconnected.

Use the declared phasor convention exp(iωt). A resistor has impedance R, an inductor iωL and a capacitor 1/(iωC)=−i/(ωC). A series RLC circuit therefore has Z=R+iX with X=ωL−1/(ωC). Divide the source voltage phasor by Z to obtain current. Its magnitude is V_rms/sqrt(R²+X²) when rms quantities are used. The impedance phase φ satisfies tanφ=X/R; current lags voltage for X>0 and leads it for X<0. Adding the scalar magnitudes R, ωL and 1/(ωC) loses the vector phase information.

Series resonance occurs at ω₀=1/sqrt(LC) when X=0. Current is maximal for a fixed voltage in this ideal series model, and the voltage/current phase difference is zero. Mean real power is V_rms I_rms cosφ=I_rms²R; ideal L and C exchange energy but dissipate no average power. This differs from transient natural frequency: a damped series circuit can oscillate at sqrt(1/(LC)−(R/(2L))²) when underdamped. Large resistance removes such free oscillation but does not change the condition X=0 of the ideal driven series impedance. State whether a question asks for a step response, free decay or sinusoidal steady state.

An RC circuit switches to fixed source voltage Vs. Charge conservation and Kirchhoff's law give

For R = 2 kilohms, C = 1 millifarad, Vs = 12 V and initial voltage zero, The time constant 时间常数 controls the remaining difference from the final state.

RC has τ=RC, while RL has τ=L/R. Do not confuse current amplitude with rms current, or resonance of a driven impedance with damped free-oscillation frequency.

time constant: The exponential response scale, RC for an RC circuit and L/R for an RL circuit.

impedance: The complex voltage-to-current phasor ratio in sinusoidal steady state.