AQA · GCSE
الفيزياء
ورقات امتحان، وعينات، ووثائق المناهج لهذا المقرر.
رمز المؤهل: 8463
أوراق امتحانات سابقة حديثة
20 ازدواجيات ورقة الأسئلة ومخطط التصحيح
تصفح الورقات ومخططات التصحيح →مواد تعليمية، أوراق تمارين وشرائح عرض
تحتفظ المستندات المشتركة بموضوعاتها بأسماء دورتها وموضوعها الأصلي. استخدم مواصفات الهيئة التي اخترتها لتغطية المحتوى، ومستوى الصعوبة ومتطلبات الامتحان.
أوراق تمارين · AQA · GCSE · Physics (48)
- 1.1 Energy stores and systems (4.1.1.1)
- 1.2 Changes in energy — kinetic, elastic and gravitational (4.1.1.2)
- 1.3 Energy changes in systems — specific heat capacity (4.1.1.3, RP1)
- 1.4 Power (4.1.1.4)
- 1.5 Conservation and dissipation of energy (4.1.2.1, RP2)
- 1.6 Efficiency (4.1.2.2)
- 1.7 National and global energy resources (4.1.3)
- 2.1 Circuit symbols, electrical charge and current (4.2.1.1–4.2.1.2)
- 2.2 Current, resistance and potential difference (4.2.1.3, RP3)
- 2.3 Resistors and I–V characteristics (4.2.1.4, RP4)
- 2.4 Series and parallel circuits (4.2.2)
- 2.5 Domestic uses and safety (4.2.3)
- 2.6 Power and energy transfers in appliances (4.2.4.1–4.2.4.2)
- 2.7 The National Grid (4.2.4.3)
- 2.8 Static electricity — physics only (4.2.5)
- 3.1 Density of materials (4.3.1.1, RP5)
- 3.2 Changes of state and internal energy (4.3.1.2–4.3.2.1)
- 3.3 Specific heat capacity and temperature changes (4.3.2.2)
- 3.4 Specific latent heat (4.3.2.3)
- 3.5 Particle motion in gases (4.3.3.1)
- 3.6 Pressure in gases and work done on a gas — physics only (4.3.3.2–4.3.3.3)
- 4.1 The structure of an atom; mass number and isotopes (4.4.1.1–4.4.1.2)
- 4.2 Development of the model of the atom (4.4.1.3)
- 4.3 Radioactive decay and nuclear radiation (4.4.2.1)
- 4.4 Nuclear equations, half-lives and random decay (4.4.2.2–4.4.2.3)
- 4.5 Radioactive contamination and background radiation (4.4.2.4–4.4.3.1)
- 4.6 Uses of nuclear radiation; choosing half-lives (4.4.3.2–4.4.3.3)
- 4.7 Nuclear fission and fusion — physics only (4.4.4)
- 5.1 Scalars, vectors, types of force and resultant forces (4.5.1.1–4.5.1.4)
- 5.2 Work done and energy transfer (4.5.2)
- 5.3 Forces and elasticity (4.5.3, RP6)
- 5.4 Moments, levers and gears — physics only (4.5.4)
- 5.5 Pressure and pressure differences in fluids — physics only (4.5.5)
- 5.6 Describing motion along a line (4.5.6.1.1–4.5.6.1.5, RP7)
- 5.7 Forces, accelerations and Newton's laws (4.5.6.2)
- 5.8 Forces and braking (4.5.6.3)
- 5.9 Momentum — HT only (4.5.7)
- 6.1 Transverse and longitudinal waves; properties of waves (4.6.1.1–4.6.1.2, RP8)
- 6.2 Reflection, sound and waves for detection — physics only (4.6.1.3–4.6.1.5)
- 6.3 Electromagnetic waves (4.6.2.1–4.6.2.4)
- 6.4 Lenses and visible light — physics only (4.6.2.5–4.6.2.6)
- 6.5 Black body radiation — physics only (4.6.3, RP9)
- 7.1 Permanent and induced magnetism, magnetic fields (4.7.1)
- 7.2 Electromagnetism and the motor effect (4.7.2)
- 7.3 Induced potential, the generator effect and transformers — physics only, HT (4.7.3)
- 8.1 Our solar system and the life cycle of a star (4.8.1.1–4.8.1.2)
- 8.2 Orbital motion, natural and artificial satellites (4.8.1.3)
- 8.3 Red-shift — physics only (4.8.2)
عروض تقديمية · AQA · GCSE · Physics (8)
نشرات · IGCSE الفيزياء (6)
أوراق تمارين · IGCSE الفيزياء (24)
- 1.1 الكميات الفيزيائية وتقنيات القياس
- 1.2 الحركة
- 1.3 الكتلة والوزن
- 1.4 الكثافة
- 1.5 القوى
- 1.6 كمية التحرك
- 1.7 الطاقة، الشغل والقدرة
- 1.8 الضغط
- 2.1 النموذج الجزيئي الحركي للمادة
- 2.2 الخصائص الحرارية ودرجة الحرارة
- 2.3 انتقال الطاقة الحرارية
- 3.1 خصائص الموجات العامة
- 3.2 الفاتح
- 3.3 المطي الكهرومغناطيسي
- 3.4 الصوت
- 4.1 ظواهر المغناطيسية البسيطة
- 4.2 المقادير الكهربائية
- 4.3 الدوائر الكهربائية
- 4.4 السلامة الكهربائية
- 4.5 التأثيرات الكهرومغناطيسية
- 5.1 النموذج النووي للذرة
- 5.2 النشاط الإشعاعي
- 6.1 الأرض والنظام الشمسي
- 6.2 النجوم والكون
عروض تقديمية · IGCSE الفيزياء (6)
وحدات المقرر وأهداف التعلم
تعلم هذه الدروس أهدافاً محددة من المقرر. تحقق من فجوات التغطية المتبقية؛ المادة ليست برنامج تحضير شامل.
4.1 · Energy
- Energy transferred per unit time.
- Define the system and useful output before calculating efficiency. Doubling speed quadruples kinetic energy at constant mass. Power describes transfer per time, not total energy.
- Measure a lifting height and load, time the lift, and record electrical input with suitable instruments. Repeat trials and account for heating or friction as transfers, not missing energy.
- Energy per mass per temperature rise.
- Temperature relates to particle motion in a model; internal energy includes kinetic and potential contributions. During a change of state, energy can change particle arrangements rather than temperature.
- Measure mass, electrical input and temperature change for an insulated block. Ensure the temperature sensor has good contact, allow time for equilibration, and consider energy transferred to the surroundings.
- قدرة
- Energy transferred per unit time
- الكفاءة
- Useful output divided by total input
- specific heat capacity
- Energy per mass per temperature rise
- الحرارة الكامنة
- Energy associated with a change of state
4.2 · Electricity
- Rate of flow of charge.
- Current is the same through components in series. Potential differences add around the series path. In parallel, branches share the same potential difference, while branch currents sum at a junction.
- Place an ammeter in series and a voltmeter in parallel. For an I-V investigation, change voltage in steps, reverse polarity when appropriate and limit current to reduce heating.
- التيار
- Rate of flow of charge
- potential difference
- Energy transferred per unit charge
4.3 · Particle model of matter
- Energy per mass per temperature rise.
- Temperature relates to particle motion in a model; internal energy includes kinetic and potential contributions. During a change of state, energy can change particle arrangements rather than temperature.
- Measure mass, electrical input and temperature change for an insulated block. Ensure the temperature sensor has good contact, allow time for equilibration, and consider energy transferred to the surroundings.
- Temperature on the kelvin scale.
- State which quantities stay fixed. A pressure-volume relation requires consistent units and a fixed temperature. The kelvin-based temperature ratio is an extension only where the course explicitly specifies it.
- Use approved apparatus with a temperature range and pressure limit set by the teacher. Allow thermal equilibrium and record pressure against kelvin temperature. Never heat an improvised sealed vessel.
- specific heat capacity
- Energy per mass per temperature rise
- الحرارة الكامنة
- Energy associated with a change of state
- absolute temperature
- Temperature on the kelvin scale
- ideal gas
- A gas model with specified simplifying assumptions
4.4 · Atomic structure
- Time for activity or undecayed population to halve.
- Subtract background counts measured over the same time interval. Distinguish irradiation from contamination. Shielding, distance and reduced exposure time can reduce risk under a school-controlled procedure.
- Use teacher-managed sources and the school radiation rules. Record count duration and repeat background measurements. Do not extrapolate a half-life from one nucleus or from uncorrected readings.
- half-life
- Time for activity or undecayed population to halve
- background radiation
- Radiation measured apart from the investigated source
4.5 · Forces
- Mass multiplied by velocity.
- Impulse equals momentum change. Increasing stopping time for the same momentum change reduces average force. Identify external forces before applying momentum conservation.
- Draw a free-body diagram containing only forces on the selected object. For spring measurements, add loads in steps within the elastic range and measure extension from the unloaded position.
- Rate of change of displacement.
- The gradient of a displacement-time graph is velocity. The area under a velocity-time graph gives displacement. A constant-acceleration formula is valid only when its assumption is justified.
- Choose a positive direction and state it. Use a light gate or video with a known scale and frame interval for repeatable motion measurements. Avoid assuming hand timing is exact over very short intervals.
- momentum
- Mass multiplied by velocity
- resultant force
- The vector sum of forces on an object
- velocity
- Rate of change of displacement
- acceleration
- Rate of change of velocity
4.6 · Waves
- Distance between successive points in phase.
- At a boundary, frequency stays fixed by the source. A change of speed changes wavelength. Refraction follows from speed differences; angles are measured from the normal.
- Measure several wavelengths and divide to reduce fractional reading uncertainty. Use a ray box with a normal drawn at the boundary. Keep the beam away from eyes and record incident and refracted angles clearly.
- الطول الموجي
- Distance between successive points in phase
- التردد
- Number of oscillations per unit time
4.7 · Magnetism and electromagnetism
- Creation of emf by changing flux linkage.
- Changing field strength, coil area, orientation or relative motion can change flux linkage. Lenz law describes an induced effect opposing the change producing it, consistent with energy conservation.
- Use a coil and sensitive meter to compare magnet motion in each direction. Record that a stationary arrangement gives no induced signal. Use approved low-voltage supplies for motor demonstrations.
- induction
- Creation of emf by changing flux linkage
- transformer
- A device transferring energy between coils through changing flux
4.8 · Space physics (physics only)
- Total emitted power.
- For isotropic emission without absorption, flux follows an inverse-square relationship with distance. Observed brightness alone therefore cannot establish luminosity.
- Compare source observations with the life-cycle model and identify the relevant initial mass. State limitations of evidence rather than treating a model diagram as a direct observation of one star whole lifetime.
- اللمعان
- Total emitted power
- flux
- Power received per unit area
الاستعداد لهذا المؤهل
- Foundation and Higher route, with physics-only and HT statements retained.
- Paper 1: 4.1–4.4; Paper 2: 4.5–4.8. Each is 100 marks, 1 h 45 min, 50%.
- Use the equation sheet for the actual examination year; do not infer a 2026 aid from a 2024 copy.
- The acquired equations insert is explicitly FOR USE IN JUNE 2027 ONLY. AQA confirms its content is unchanged from 2026, but examinations must use their own dated clean insert, supplied with both papers. Preserve the insert’s HT labels; do not infer future assessment conditions from this copy.
التغطية التدريس ما زالت مطلوبة
- Full energy stores, insulation, resources and efficiency objectives remain.
- Static electricity (physics only), domestic supply/safety and detailed network calculations remain.
- Use GCSE gas variant; density, changes of state, specific latent heat and physics-only work on gases remain.
- Historical atomic models, decay equations, hazards/uses, fission and fusion remain.
- Moments, pressure, vectors, elasticity, stopping-distance factors and momentum at the appropriate tier remain.
- Full electromagnetic spectrum, lenses, sound/ultrasound and black-body radiation physics-only objectives remain.
- Permanent/induced magnets, motor force HT, generators, microphones, transformers and loudspeakers need complete objectives.
- Full solar-system, orbits, life-cycle and redshift objectives remain.
المواصفات والوثائق النموذجية
مواد المقرر
تحضير المقرر
المستندات متاحة. ملاحظات اللجان المحددة، والتقييمات، والممارسة التفاعلية للامتحانات السابقة ليست متاحة بعد لجميع المقررات الدراسية.
دروس →